The reliable two-bucket method of car washing is your best bet for washing a car wrap. This ensures that you remove the dirt, debris, and crap on the wrap, without damaging it with automatic machines or pressure washing. If you go to a professional wrap shop for washing your car, you may find Professional Tinting Tools, Tools For Vinyl Wrapping and paint protection film tools.
You should also avoid using high-pressure hoses to wash or rinse the wrap. Again, some high-pressure systems are OK to use. It's mainly based on the ‘pressure’ used. If you’re going to use a pressure washer, make sure to ask your vinyl wrap manufacturer what PSI the system should be set.
Gentle cleaning with hands is recommended for vinyl-wrapped cars. Never scrub the surface using brush car washes, as it might lead to scratching and peeling off of vinyl wraps.
Also, use a pressure washer at a right-angle to the surface and ensure that the pressure is gentle, i.e., under 2000 psi. If you notice some stubborn spots, target the spot with isopropyl alcohol to get rid of them.
Moreover, not all wax and polishes can be used on vinyl surfaces, as they often lead to the hazing of matte-finished vinyl sheets. So, only use vinyl-safe waxes for a showroom shine.
Gentle cleaning is best. Hand washing and drying is the recommended method to keep vinyl clean. Use a silicone squeegee to remove excess water before drying with microfiber towels. Brush car washes are not recommended, as these can scratch and pull at the edges of your vinyl wrap.
You can bring your wrapped vehicle to an automated brushless car wash, though hand washing is safer and more thorough. Brush car washes may be too rough on the film, degrading it and causing peeling and lifted edges. If a car wash uses water spray and no brushes, it should be safe for most wraps.
No comments:
Post a Comment